Duravent PolyPro Flex User Manual download pdf (Page 10)

10

Instructions- 3" (80mm) PP Flex in B Vent

1. Remove existing B Vent termination cap

2. Carefully feed ex down through B Vent so

approx 2' of ex extends beyond the bottom

of the B Vent (Flex puller or rope aid optional)

3. Cut to length the top of Flex pipe and

insert ex through B Vent Adapter- Upper

4. Install PP Flex Gasket and Flex Female

Adapter onto Flex pipe per instructions

detailed above

5. Lower B Vent Adapter- Upper to the top

of the B Vent and secure with screws (x3)

supplied

6. Install C Support Bracket as shown in Fig.14

and lower Flex Female Adapter into B Vent

Adapter- Upper

7. Attach Termination Top to Termination Cap

(clicks when engaged), insert 3" Rigid Pipe

into Termination Cap, and attach Termination

Insert into Termination Cap (clicks). Then

connect Termination Insert to Termination

Transition (click).

8. Line up inner pipe connections and push

termination assembly down onto B Vent

Adapter- Upper and secure with screws (x3)

provided

9. Cut Flex to length 3" below the bottom of

the B Vent

10. Install Flex Gasket and Flex Male Adapter

on Flex

11. Install B Vent Adapter- Lower. (Flex Male

Adapter should protrude beyond per Fig.13)

12. Secure B Vent Adapter- Lower to B Vent

with hardware provided

Figure 13

B Vent PiPe

flex Male

aDaPteR

B Vent

aDaPteR-

loweR

MountinG

haRDwaRe

teRMination caP

flex Male aDaPteR

3" (80MM) flex Gasket

B Vent aDaPteR- loweR

teRMination tRansition

B Vent aDaPteR- uPPeR

B Vent PiPe

teRMination inseRt

3" (80MM) RiGiD PiPe

c suPPoRt BRacket

MountinG haRDwaRe

flex feMale aDaPteR

3" (80MM) flex

3" (80MM) flex Gasket

Figure 15- (3" Flex / B Vent)

teRMination toP

Figure 14

B Vent

PiPe

B Vent

aDaPteR-

uPPeR

flex

feMale

aDaPteR

c suPPoRt

BRacket

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments